| Worded Direction Traffic Signs |
24"×24" Stop Ahead
Road Sign
$86.68
|
24"×24" Truck Crossing
Road Sign
$86.68
|
24"×24" Slippery When Wet
Road Sign
$86.68
|
24"×24" Road Closed
Road Sign
$86.68
|
| Directional Traffic Signs |
24"×24" Left Turn
Road Sign
$86.68
|
24"×24" Right Turn
Road Sign
$86.68
|
24"×24" Left Curve
Road Sign
$86.68
|
24"×24" Right Curve
Road Sign
$86.68
|
| One Way Traffic Signs |
18"×24" (Fiberglass)
One Way - Left Road Sign
$60.99
|
18"×24" (Fiberglass)
One Way - Right Road Sign
$60.99
|
24"×24" Do Not Enter
Road Sign
$86.64
|
18"×18" Enter - Right
Road Sign
$52.59
|
| Pedestrian Crosswalk Road Signs |
30"×30" School Students Crossing Road Sign
$212.12
|
30"×30" Pedestrian Crossing Road Sign
$191.89
|
30"×30" Pedestrian Crossing Road Sign
$191.89
|
18"×24" Slow - Pedestrian Crossing Road Sign
$65.07
|
What is the MUTCD?
The traffic control devices (TCD) (including traffic signs and road signs) are very critical for the safe and efficient transportation of people and goods.
The Manual on Uniform Traffic Control Devices (MUTCD), by setting minimum standards and providing guidance, ensures uniformity of TCDs across the nation.
The use of uniform TCDs (messages, location, size, shapes, and colors) helps reduce crashes and congestion, and improves the efficiency of the surface transportation system.
Uniformity also helps reduce the cost of traffic signs and road signs through standardization.
The information contained in the MUTCD is the result of either years of practical experience, research, and or the MUTCD experimentation process. This effort ensures that traffic signs and road signs are visible, recognizable, understandable, and necessary.
The MUTCD is a dynamic document that changes with time to address contemporary safety and operational issues.
Mounting Traffic Signs and Road Signs
All Labelmaster traffic signs and road signs come with standard mounting holes centered top and bottom for easy installation.
These TCDs accept 5/16" bolts and nuts and a standard length to use is 2 1/2" which may be purchased in the Labelmaster Store Traffic Signs Accessories section (Mounting Bolts and Nuts).
Traffic signs and road signs are typically installed on U-channel posts or square posts, but can be mounted to tubular pipe posts or movable posts.
You should always refer to your local DOT guidelines and city requirements when installing traffic control devices. Refer to the MUTCD which gives examples of placement and height of traffic signs and road signs.
More Traffic Signs and Road Signs Information:
Related Products:
|
