Slidemaster Placard Holder, 2 Clipped Corners, Brite Mill

Item No.80SMPCC97
Slidemaster Placard Holder, 2 Clipped Corners, Brite Mill
Qty.
List Price
1 - 36
$17.03
37 - 108
$11.26
109 +
$10.38
Piece
Your Price
Price Per Piece
Excl. Tax
    Item Description
    Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Slidemaster Slide-In Placard Holder with two clipped corners for use on 15 roll-up rear door panels comes with a shiny brite mill metal finish on .032 aluminum. Our most economical DOT Placard System is priced per each.
    Length
    12.5 "
    Height
    14.125 "
    Format
    Frame
    Format Unit Of Measure
    1
    Manufacturer Name
    Labelmaster
    Manufacturer Number
    80SMPCC97
    UPC Code
    887277139127
    Frame Style
    2 Clipped Corners
    Frame Finish
    Brite Mill
    Regulatory Agency
    DOT
    Regulatory Standard
    Appendix C to part 174
    Prop 65 Warning
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Cancer Warning Chemical Info
    Benzophenone
    Reproductive Harm Chemical
    Toluene
    Material
    Aluminum
    Weight
    1.05 lbs
    Country Of Origin
    US
    Harmonized Tariff Code
    8310000000
    UNSPSC Code
    55121726

    Reviews (0)

    There are no reviews yet.

    Slidemaster Placard Holder, 2 Clipped Corners, Brite Mill

    Slidemaster Placard Holder, 2 Clipped Corners, Brite Mill

    Item No.80SMPCC97
    Specification Sheet
    Qty.
    List Price
    1 - 36
    $17.03
    37 - 108
    $11.26
    109 +
    $10.38
    Piece
    Your Price
    Price Per Piece
    Excl. Tax
      Item Description
      Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Slidemaster Slide-In Placard Holder with two clipped corners for use on 15 roll-up rear door panels comes with a shiny brite mill metal finish on .032 aluminum. Our most economical DOT Placard System is priced per each.
      Length
      12.5 "
      Height
      14.125 "
      Format
      Frame
      Format Unit Of Measure
      1
      Manufacturer Name
      Labelmaster
      Manufacturer Number
      80SMPCC97
      UPC Code
      887277139127
      Frame Style
      2 Clipped Corners
      Frame Finish
      Brite Mill
      Regulatory Agency
      DOT
      Regulatory Standard
      Appendix C to part 174
      Prop 65 Warning
      WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
      Cancer Warning Chemical Info
      Benzophenone
      Reproductive Harm Chemical
      Toluene
      Material
      Aluminum
      Weight
      1.05 lbs
      Country Of Origin
      US
      Harmonized Tariff Code
      8310000000
      UNSPSC Code
      55121726

      Reviews (0)

      There are no reviews yet.